TODTS=00, TOHCTL=0, TOMDS=00, TOLCTL=0
Timeout Control Register
TODTS | Timeout Detection Time Selection 0 (00): 16bit-timeout 1 (01): 14bit-timeout 2 (10): 8bit-timeout 3 (11): 6bit-timeout |
TOLCTL | Timeout L Count Control 0 (0): Count is disabled while the SCLn line is at a low level. 1 (1): Count is enabled while the SCLn line is at a low level. |
TOHCTL | Timeout H Count Control 0 (0): Count is disabled while the SCLn line is at a high level. 1 (1): Count is enabled while the SCLn line is at a high level. |
TOMDS | Timeout Operation Mode Selection 0 (00): Timeout is detected during the following conditions: The bus is busy (BCST.BFREF = 0) in master mode.IIC’s own slave address is detected and the bus is busy in slave mode.The bus is free (BCST.BFREF = 1) while generation of a START condition is requested (CNDCTL.STCND = 1). 1 (01): Timeout is detected while the bus is busy. 2 (10): Timeout is detected while the bus is free. 3 (11): Setting prohibited |